Skip to content
Pitco 35C+S Natural Gas Floor Fryer 35-40 lb 90,000 BTU
Pitco 35C+S Natural Gas Floor Fryer 35-40 lb 90,000 BTU
The Pitco 35C+S natural gas floor fryer is built for restaurants and foodservice operations that need consistent, high-volume frying without a complicated setup. It holds 35 to 40 pounds of oil in a 14" x 14" stainless steel fry pot and puts out 90,000 BTUs, making it a capable workhorse for frying chicken, fish, fries, and other menu staples day in and day out.
- 35–40 lb oil capacity in a 14" x 14" stainless steel fry pot — enough volume to keep up during peak service
- 90,000 BTU natural gas burner with tube-fired heat exchanger keeps oil recovery times short between loads
- Millivolt controls with a standing pilot regulate oil temperature from 200°F to 400°F — no external power required to operate the controls
- Deep cold zone captures food debris below the cooking area, helping extend oil life and protect food flavor over a long shift
- Built-in safety controls shut off gas if the pilot flame goes out or if oil temperature exceeds the high-limit threshold
- Stainless steel tank, door, and front; comes with two wire baskets, a tube rack, basket hanger, and drain extension — ready to run out of the box
At 15.1" wide, this fryer fits into tight line configurations where space is limited. CSA and NSF certified. A solid pick for a diner, fast-casual spot, or any kitchen that fries regularly and wants a straightforward, operator-friendly unit from Pitco Frialator.
Specifications
| Heat Output | 90,000 BTU |
|---|---|
| Fry Pot Dimensions | 14 in x 14 in |
| Tank Material | Stainless Steel |
| Exterior Finish | Stainless steel front, door, and tank; galvanized sides and back |
| Controls | Millivolt, standing pilot |
| Drain | 1-1/4 in NPT front drain |
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit
www.P65Warnings.ca.gov.
