
T&S B-0044-H Flex Stainless Steel Pre-Rinse Hose
T&S Brass 44 Inch Flexible Stainless Steel Pre-Rinse Hose with Handle
When your pre-rinse hose wears out or starts leaking, the T&S Brass B-0044-H is a direct replacement built for commercial dish rooms and prep sinks. This 44-inch flexible stainless steel pre-rinse hose connects via standard 3/4-14 UN fittings, making it compatible with most T&S pre-rinse assemblies and other units using that thread standard. It's the replacement part restaurant and institutional kitchens reach for to get their pre-rinse station back on the line.
- 44 inches of flexible stainless steel hose — enough reach for a standard pre-rinse bay without excess slack
- 3/4-14 UN female inlet and outlet connections fit standard commercial pre-rinse valve bodies
- Handles up to 6.25 GPM flow and rated for 20–125 PSI operating pressure
- Rated for water temps up to 140°F — holds up to the hot water a commercial pre-rinse station runs
- NSF 61 Section 9 and NSF 372 certified; low-lead compliant at 0.25% max — meets health code requirements for potable water contact
- Chrome-plated brass end fittings, stainless steel hose exterior, and a heat-resistant thermoplastic handle; hose washers included
Made in the USA by T&S Brass. A 3-year limited warranty backs the unit. If you're running a T&S pre-rinse system or any pre-rinse setup threaded 3/4-14 UN, this hose drops straight in.
Specifications
| Hose Length | 44 in |
|---|---|
| Connection Type | 3/4-14 UN female inlet and outlet |
| Max Flow Rate | 6.25 GPM (23.66 L/min) |
| Operating Pressure Range | 20 PSI min – 125 PSI max |
| Hose Exterior Material | Stainless steel |
| Inner Tubing Material | Polyurethane |
| End Fittings Material | Polished chrome-plated brass |
| Lead Content | Low lead, 0.25% max (NSF/ANSI 372 compliant) |
| Shipping Weight | 2.00 lb |
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit
www.P65Warnings.ca.gov.




