Skip to content
T&S Brass B-0107-J Low-Flow Pre-Rinse Spray Valve 1.07 GPM Gray
T&S Brass B-0107-J Low-Flow Pre-Rinse Spray Valve 1.07 GPM Gray
The T&S Brass B-0107-J low-flow pre-rinse spray valve is built for commercial dish stations that need to cut water use without slowing down the rinse cycle. At 1.07 GPM, it meets DOE PRSV Class II and EPAct 2005 requirements — a straightforward drop-in for operators dealing with water efficiency mandates or replacing a worn valve on an existing T&S pre-rinse unit. The gray handle makes it easy to ID on a busy line.
- Flow rate: 1.07 GPM — meets DOE PRSV Class II and EPAct 2005 water efficiency standards
- Fan-jet spray pattern with knife action clears food debris fast without excess water
- Inlet: 3/4-14 UN male thread — compatible with standard T&S Brass pre-rinse faucet assemblies
- Chrome-plated brass body with rubber spray shield; operates between 20–125 PSI
- Self-closing valve; ships with hose washer and hold-down ring included
- Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9, and NSF 372
A solid T&S Brass spray valve replacement for restaurants, cafeterias, or any commercial kitchen where the existing valve is worn or the operation needs to bring the dish station into compliance with current flow rate standards.
Specifications
| Inlet Thread | 3/4-14 UN male |
|---|---|
| Operating Pressure Range | 20–125 PSI |
| Rated Test Pressure | 60 PSI |
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information, visit
www.P65Warnings.ca.gov.
